Cabletron Systems EMM-E6 manual Configuring Link/Seg Traps for the Repeater

Link/Seg Traps

Configuring Link/Seg Traps for the Repeater

To enable or disable Link and Segmentation traps for all ports on a repeater:

1.In the Repeater Link/Seg Traps window, click mouse button 1 on the repeater interface for which you would like to configure link and segmentation traps.

2.Click mouse button 1 on ; the Channel X Link/Seg Traps window, Figure 4-2, will appear.

Figure 4-2. Channel X Link/Seg Traps Window

3.In the Link Traps field, click mouse button 1 on the appropriate selection to Enable or Disable link traps for the repeater.

4.In the Segmenting Traps field, click mouse button 1 on the appropriate selection to Enable or Disable segmenting traps for the repeater.

5.Click mouse button 1 on to save your changes; the current status will be displayed in each field to the right of the field name. Click on to exit the window.

Viewing and Configuring Link/Seg Traps for Hub Modules

To enable or disable Link and Segmentation traps for all ports on the selected hub module or modules:

1.In the Repeater Link/Seg Traps window, select a repeater interface in the scroll list.

2.Click mouse button 1 on ; the module traps window, Figure 4-3, will appear.

4-4 Enabling and Disabling Link/Seg Traps