Cabletron Systems EMM-E6 manual Viewing and Configuring Link/Seg Traps for Ports

Link/Seg Traps

Viewing and Configuring Link/Seg Traps for Ports

To enable or disable Link and Segmentation traps for individual ports:

1.In the Repeater Link/Seg Traps window, select a repeater in the scroll list.

2.Click mouse button 1 on ; the port traps window, Figure 4-4, will appear.

Figure 4-4. The Port Traps Window

3.In the port traps window, click mouse button 1 to select the port or ports for which you wish to configure traps. If theSet Trap Status For field displays Selected Ports (the default setting), you can click to select any ports; to de- select any highlighted port, click on it again. If the selection All Ports on Module is displayed in the Set Trap Status For field, you can select only one port at a time; trap status will be set for all ports on the same module as the selected port. If the selection All Ports on Repeater is displayed in the Set Trap Status For field, all available ports will be automatically selected; if you de-select any port, the Set Trap Status For field will automatically revert to the Selected Ports setting. To change the setting in the Set Trap Status For field, click on the currently displayed setting, and drag down to select a new setting.

4.Click on the appropriate selection in the Link Traps field toEnable or Disable link traps for the selected modules, as desired.

4-6 Enabling and Disabling Link/Seg Traps