Cabletron Systems EMM-E6 manual 2. Channel X Port Security Window, Configuring Security

Security

Figure 7-2. Channel X Port Security Window

The top portion of the window contains a list box which displays each port communicating on the selected channel, designated by module and port number. Each port’s current Lock Status, violation response, Security Level, and Trap status is also displayed. Note that any ports on a non-LANVIEWSECUREMIM or any LANVIEWSECURE TPXMIM ports configured to operate on Channel A will display “not applicable” in the Security Level field; eavesdropper protection (scrambling) and continuous lock mode cannot be implemented for these ports. (See Security on Non-LANVIEWSECUREMIMs, page 7-5, for more information.)

The lower portion of the window provides the fields you need to configure security for one or more of the listed ports. Note that if you select a group of ports with different security capabilities, only those capabilities which apply to every port in the selected group will be active; those which are not available for every port in the selected group will be grayed out.

To configure security levels and violation response:

1.Use the Set Security For field or the mouse to select the port or ports for which you wish to configure security (note that the settings in theSet Security For field will change automatically as you click to select or de-select ports).

Configuring Security 7-7