Casio 3.04 SG-Controller, SNumber Format, IGeometry Format Dialog Box, Normal, Normal, Fix 0 –, Sci 0 –, Do this:, check box, Clear the, check box, Select the

Do this:

Select the [G-Controller] check box.

Clear the [G-Controller] check box.*

1-9-9

Configuring Application Format Settings

SG-Controller

To do this:

Turn on display of graph controller arrows during graphingTurn off display of graph controller arrows during graphing

• The above is the same as the [G-Controller] setting on the Graph Format dialog box.

IGeometry Format Dialog Box

Use the Geometry Format dialog box to configure settings for the Geometry application.

Tip

•The information that appears in the preview area at the bottom of the dialog box shows a preview of the Geometry application window, based on the settings configured in upper half of the dialog box.

SNumber Format

To specify this type of numeric value display format on	Select this setting:
the Geometry window:
Auto exponential display for values less than 10–2and from	Normal 1
1010 or greater (when you are in the Decimal mode)
Auto exponential display for values less than 10–9and from	Normal 2
1010 or greater (when you are in the Decimal mode)
Fixed number of decimal places	Fix 0 – 9
Fixed number of significant digits	Sci 0 – 9

• The initial default [Number Format] setting is Fix 2.

20060301