Casio 3.04 (4), • This displays the Transform dialog box, (2)Draw triangle ABC, and then select its three sides, Since we want a triangle that is symmetrical about the

8-2-38

Drawing Figures

Tip

•All of the steps in the procedure below are performed using the Geometry application only. You can also use the Main application or eActivity application to perform matrix calculations and obtain the same transformation. You can drag a figure from Geometry to Main, which transforms values (matrix) and performs calculation, and drag the values (matrix) obtained as a result from Main to Geometry to draw the transformed figure. After performing the following procedure, see “Transform Example Using the Main Application” (page 8-2-40).

If you need to, tap [Edit] and then [Clear All] before beginning this example.

SClassPad Operation

(1)Tap Qto turn on coordinate display in the Geometry window.

•You can skip this step if you want, but turning on coordinate display helps you see how coordinates are changed by the transform operations.

(2)Draw triangle ABC, and then select its three sides.(3)Tap [Draw], [Construct], and then [General Transform].• This displays the Transform dialog box.

(4)Since we want a triangle that is symmetrical about the x-axis to the original triangle, input [[1, 0], [0, –1]].

20060301