Cisco Systems IP Phone 8941 and 8945 manual Power-Save Mode, Handset Rest

Power-Save Mode

Depending on how your system administrator sets up your phone, the phone display may go into a power-save mode (the phone screen appears blank and the Select button is lit white).

To turn on the phone display, press any button or pick up the handset.

Handset Rest

Your system administrator may have mounted your phone on a wall. With a wall-mounted phone, you may need to adjust the handset rest to ensure that the receiver does not slip out of the cradle.

1 2 3 4

192897

1

2

3

4

Remove the handset from the cradle and pull the plastic tab from the handset rest.

Rotate the tab 180 degrees.

Hold the tab between two fingers, with the corner notches facing you.

Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from the top of the rotated tab. Return the handset to the handset rest.

10 OL-23119-01