Cisco Systems IP Phone 8941 and 8945 manual Redial, Secure and Nonsecure Indication Tone

Report Problems on Your Phone

1.Press the Quality Reporting Tool button.

2.Select the item that most closely matches your problem. (Use the Navigation pad and Select button to scroll and select.)

3.Press the Select softkey.

The information is sent to your system administrator.

Redial

Redial allows you to call the most recently dialed phone number by pressing a button.

Redial a Number

Press the Redial softkey.

To place the call on a specific phone line, get a dial tone on that line, then press the Redial softkey.

Secure and Nonsecure Indication Tone

When a phone is configured as secure (encrypted and trusted), it can be given a “protected” status. After that if desired, the protected phone can be configured to play an indication tone at the beginning of a call.

Only protected phones hear these secure or nonsecure indication tones. (Nonprotected phones never hear tones.) If the overall call status changes during the call, the indication tone changes accordingly. The protected phone plays the appropriate tone.

A protected phone plays a tone or not under these circumstances:

•When the option to play a tone, “Play Secure Indication Tone option,” is enabled (True):

–When end-to-end secure media is established and the call status is secure, the phone plays the secure indication tone (three long beeps with pauses).

–When end-to-end nonsecure media is established and the call status is nonsecure, the phone plays the nonsecure indication tone (six short beeps with brief pauses). (This capability is a change with this release.)

•When the Play Secure Indication Tone option is disabled, no tone is played.

For more information, see your system administrator.

62 OL-23119-01