2
System Summary
The System Summary displays information about the current status of the device connections, status, settings, and logs.
System Information
System information descriptions:
•Serial Number—Serial number of the device.
•Firmware version—Version number of the installed firmware.
•PID VID—Version number of the hardware.
•MD5 Checksum—A value used for file validation.
•LAN IPv4/ Subnet Mask—IPv4 management IP address and subnet mask of the device.
•LAN IPv6/ Prefix—IPv6 management IP address and prefix.
•Working Mode—Controls the behavior of the device in relation to the WAN connection. Gateway Mode is selected when the device is hosting an Internet WAN connection. Router Mode is selected when the device is on a network that does not have a WAN connection or another device is used to establish the WAN connection. To change this parameter, click Working Mode to display the Advanced Routing window.
•LAN—IPv4 management IP address. If Dual-Stack IP is enabled on the Setup Network page, the IPv6 address and prefix length also appear.
•System Up time—Length of time in days, hours, and minutes that the device has been active.
Cisco Small Business RV320/RV325 Administration Guide | 11 |
