-Extra Charge—Cost in dollars if a given period of time is exceeded.
-Stop connection...—Check to enable dropping the connection when the time exceeds the given time.
The window appears:
•Previous Cumulative Time—Amount of time the 3G/4G connection has been up since being reset.
•Current Cumulative Time—Amount of time that has elapsed since the device brought up a 3G/4G connection.
•Charge—Estimated cost of the connection since the counters were reset.
STEP 5 Set the Diagnostic behaviors:
•Restart count—Check and enter the day of the month to enable the counters to be reset on that day. If the value is greater than the number of days in the month (for example, a value of 31 in a 30-day month), the counters are restarted on the last day of the month.
•Self-testdaily—Check and enter the time-of-day (24-hour clock) to test the connection. A self-test is considered successful if the device can get an IP address from the service provider. Failures are sent to the log.
•Log self-test—Check to log all self-test activity. (All test results are sent to the log.)
STEP 6 Click Save to save your settings.
30 | Cisco Small Business RV320/RV325 Administration Guide |
