Cisco Systems RV320K9NA, RV325K9NA USB1 or USB2 Port Settings

Setup

Setup Network

28 Cisco Small Business RV320/RV325 Administration Guide

USB1 or USB2 Port Settings

USB port configuration manages the connection between this device and the USB

dongle. It also manages WAN port failover (redundancy). Some USB dongles

configure their credentials automatically. Others, such as the

Verizon UML290VW 4G dongle, require manual configuration. Refer to the

manufacturer's documentation for the dongle for more information.

To establish a 3G or 4G connection, enter the following:

•Pin Code and Confirm Pin Code—PIN code associated with your SIM card.

This field is only displayed for GSM SIM cards.

•Access Point Name—Internet network that the mobile device is

connecting to. Enter the access point name provided by your mobile

network service provider. If you do not know the name of the access point,

contact your service provider.

•Dial Number—Number provided by your mobile network service provider

for the Internet connection.

•Username and Password—User name and password provided by your

mobile network service provider.

•Enable DNS—Check the box to enable DNS.

•DNS Server (Required) and DNS Server (Optional)—IP addresses of the

DNS servers. Optionally, you can enter a second DNS server. The first

available DNS server is used.

•MTU—Maximum transmission unit (MTU) size. Select Auto to set the size

automatically. Otherwise, to set the MTU size manually, select Manual and

enter the MTU size. (The size in bytes of the largest protocol data unit that

the layer can pass.)