STEP 6
10
Log
Logs document the status of the system, either by using traps or periodically.
System Log
Configure Short Message Service (SMS) logs and alerts.
To open this page, select Log > System Log in the navigation tree.
Configuring the System Log Send SMS
To configure the link for the log, complete the following:
STEP 1 Click Enable.
STEP 2 Select USB1 or USB2 to send the log out the USB ports.
STEP 3 Check the Dial Number1 and/or Dial Number2 and enter the phone number to call.
STEP 4 Click Test to test the link.
STEP 5 Select when the log is sent:
•When a link is brought up.
•When a link is brought down.
•Authentication fails.
•The system is started.
Click Save.
Configuring the System Log Servers
To enable a server, click Enable and enter the name of the Syslog Server.
Cisco Small Business RV320/RV325 Administration Guide | 107 |
