ENGLISH

4CONNECTIONS

NOTES:

• Read the manuals of all the components when making

• Be sure to connect the left and right channels properly, L

connections.

(left) to L, R (right) to R.

• Keep the power cord unplugged until all connections have

• Plug the power cord securely into the power outlet.

been completed.

Incomplete connection may result in noise.

• If the power is on when connections are made, noise may

• Binding the power cord together with connection cords

be generated and damage the speakers.

may result in humming or noise.

(1)Connecting a TV

•Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DVD-2800’s VIDEO OUT or S-VIDEO OUT and AUDIO OUT.

To power outlet

DVD-2800

 

 

 

 

 

 

 

 

 

 

AC IN

 

 

 

 

COMPONENT

 

 

 

 

 

VIDEOOUT

 

AUDIO

DIGITAL OUT

VIDEO

Y

 

OUT

(PCM/BITSTREAM)

OUT

 

 

L

OPTICAL

COAXIAL

 

PB/CB

 

 

 

 

 

 

R

 

 

 

PR/CR

 

 

 

 

 

 

 

 

 

S-VIDEO

 

 

 

 

 

OUT

 

 

 

 

 

 

S-Video output connector

 

 

 

 

The video signals are divided into color (C) and

 

 

 

 

brightness (Y) signals, achieving a clearer picture.

 

 

 

 

If the TV is equipped with an S-Video input connector,

 

 

 

 

we recommend connecting it to the DVD-2800’s S-

 

 

 

 

Video output connector using a commercially available

 

 

 

 

S-Video connection cord.

VIDEO IN

S-VIDEO IN

 

TV

 

 

 

L

 

 

 

 

 

R

 

 

 

 

AUDIO IN

 

 

 

 

 

 

 

 

NOTES:

• Connect the DVD-2800’s video outputs to the TV either

• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP“ to

directly or through an AV amplifier. Do not connect it via a

comply with your TV's video format. When the TV is PAL

VCR (video cassette recorder). Some discs contain copy

formated, set to PAL. (See page 22.)

prohibit signals. If such discs are played via a VCR, the copy prohibit system may cause disturbance in the picture.

(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors

Color component output connectors (PR/CR, PB/CB and Y)

The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful reproduction of the colors.

• The color component input connectors may be marked differently on some TVs or monitors (PR, PB and Y/R-Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.

Connect in this way if your TV is compatible with Progressive Scan.

AC IN

 

 

 

COMPONENT

 

 

 

VIDEOOUT

AUDIO

DIGITAL OUT

VIDEO

Y

OUT

(PCM/BITSTREAM)

OUT

 

L

OPTICAL COAXIAL

 

PB/CB

 

 

 

R

 

 

PR/CR

 

 

 

 

 

S-VIDEO

 

 

 

OUT

 

DVD-2800

To power outlet

TV

L

R

PR/CR PB/CB Y

AUDIO IN

COMPONENT VIDEO IN

NOTES:

•Use the three commercially available video cords to connect the DVD-2800’s color component output connectors to the TV or monitor.

•Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV's video format. When the TV is PAL formated, set to PAL. (See page 22.)

•Set the “VIDEO OUT” in “VIDEO SETUP” in “SETUP” to comply with Progressive TV. (NTSC formated only)

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT.

6