ENGLISH
2Sound output from the
|
|
|
| Sound output | Refear to | Digital audio data output |
| Audio recording format | |||||
| page | |||||
|
|
| ||||
|
|
|
|
|
|
|
|
| Dolby Digital | Digital out : Normal |
| Dolby Digital bitstream | |
|
|
|
|
| ||
|
| Digital out : PCM conversion | 23 | 2 channels PCM data (48 kHz/16 bit) | ||
|
|
|
| |||
|
|
|
|
|
| |
|
|
| DTS | Digital out : Normal | DTS bitstream | |
|
|
|
| |||
|
|
|
|
|
| |
|
|
| Digital out : PCM conversion |
| DTS bitstream | |
|
|
|
|
| ||
|
|
|
|
|
|
|
DVD video |
| MPEG audio | Digital out : Normal | 23 | 2 channel PCM data (48 kHz/16 bit) | |
|
|
| ||||
|
|
| ||||
DVD audio |
|
|
| Digital out : PCM conversion |
| 2 channel PCM data (48 kHz/16 bit) |
(video part only) |
|
|
|
|
|
|
|
|
|
| LPCM conversion mode :OFF |
| 48 kHz/16 bit ~ 24 bit PCM |
|
|
| 48 kHz |
|
|
|
| PCM |
| LPCM conversion mode :ON |
| 48 kHz/16 bit PCM | |
|
|
|
| |||
|
|
|
|
|
| |
|
| 96 kHz | LPCM conversion mode :ON | 23 | 48 kHz/16 bit PCM | |
| Linear |
| ||||
|
|
|
|
|
| |
|
| CP : ON | LPCM conversion mode :OFF |
| No output data (when copy protected) | |
|
|
|
|
|
|
|
|
|
| CP : OFF | LPCM conversion mode :OFF |
| 96 kHz PCM (when not copy protected) |
|
|
|
|
|
|
|
Video CD |
| MPEG 1 |
|
| 44.1 kHz/16 bit PCM | |
|
|
|
|
|
| |
Music CD |
| Linear PCM |
|
| 44.1 kHz/16 bit PCM | |
|
|
|
|
|
|
|
MP3 CD |
|
| MP3 |
|
| 32 ~ 48 kHz/16 bit PCM |
|
|
|
|
|
|
|
•Linear PCM audio is the signal recording format used for music CDs.
While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing higher sound quality than music CDs.
•When “OFF” is selected, digital signals are not output from the digital audio output at this time.
(6) Connecting to a Stereo Component
|
|
| TV |
|
| ||
|
|
| VIDEO IN |
|
|
| COMPONENT |
|
|
| VIDEOOUT |
AUDIO | DIGITAL OUT | VIDEO | Y |
OUT | (PCM/BITSTREAM) | OUT |
|
L | OPTICAL COAXIAL |
| PB/CB |
|
| Stereo component | |
|
|
| |
R |
|
| PR/CR |
|
|
| |
|
|
| |
|
| OUT |
|
NOTE:
•Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV's video format. When the TV is PAL formated, set to PAL. (See page 22.)
(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
✽ Set the “AUDIO SETUP” default setting as shown below. | TV |
(See page 23.) |
|
• “DIGITAL OUT” → “PCM” |
“LPCM SELECT” → “ON” |
Playing DVDs with incorrect settings may result noise that |
could damage your ears or the speakers. |
• Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ comply |
with your TV's video format. When the TV is PAL formated, |
set to PAL. (See page 22.) |
VIDEO IN
COMPONENT
VIDEOOUT
(1) Front Panel
See page 3.
q Power button |
• Press once to turn the power on. |
• Press again to set to the “OFF” position and turn the |
power off. |
• Set the power to the standby mode by pressing the |
POWER button on the remote control unit while the |
power is on. |
• Turn the power on from the standby mode by |
pressing the POWER button on the remote control |
unit. |
uPLAY button (1 PLAY)
• Press this button to play the disc. (See page 11.)
iSTILL/PAUSE button (3 STILL/PAUSE)
•Press this button to pause images or music and to play images frame by frame. (See page 12.)
o STOP button (2 STOP) |
• Press this to stop the disc. (See page 12.) |
!0 Skip button (8) |
• Press this to move back to the beginning of the |
current track (or chapter). |
AUDIO | DIGITAL OUT | VIDEO | Y |
OUT | (PCM/BITSTREAM) | OUT |
|
B |
|
|
|
L | OPTICAL COAXIAL |
| PB/CB |
|
|
| |
R |
|
| PR/CR |
|
|
| |
|
|
| |
|
| OUT |
|
Digital audio input connector (OPTICAL)
Digital audio input connector (COAXIAL)
NOTES:
In some cases, track numbers may not be assigned automatically when conducting digital recording onto a connected component while playing a CD on the
• When conducting digital recording onto an MD recorder, use the editing function to divide the tracks after recording is |
completed. |
wPower indicator
•This indicator lights when the power is on and when the power is in the standby mode.
eHDCD indicator
•This indicator lights when playing discs recorded in HDCD® format. (NOTE 1)
rProgressive Scan indicator
•Lights when progressive is selected as the video output.
tDisc tray
•Load discs here. (See page 10.)
•Press the OPEN/CLOSE button y to open and close the disc tray.
•The disc tray is also closed when the PLAY button u is pressed.
• Press again to move back to the beginning of the |
previous track (or chapter). (See page 12.) |
!1 Slow/Search button (6)
•Press this to set the slow play mode and to search in the reverse direction. (See page 12.)
!2 Skip button (9)
•Press this to move ahead to the beginning of the next track (or chapter). (See page 12.)
!3 Slow/Search button (7)
•Press this to set the slow play mode and to search in the forward direction. (See page 12.)
!4 Remote control sensor !5 Display
•Information on the disc that is currently playing is shown on the display. (See page 9.)
• When conducting digital recording onto a CD recorder, set the CD recorder’s recording setting to manual and assign the |
track numbers (track marks) manually during recording. |
yOPEN/CLOSE button (5 OPEN/CLOSE)
•Press this button to open and close the disc tray. (See page 10.)
8