Emerson Process Management IM-106-340 LOI Installation, Temperatures, Voltages, Output Values

Instruction Manual

IM-106-340, Rev. 4.0 May 2006

Oxymitter 4000

Temperatures

O2 Temp - Indicates the thermocouple temperature at the sensing cell; this should always be 1357°F (736°C).

O2 Temp Max - Maximum temperature the cell has seen. (Some process temperatures can exceed the 1357°F (736°C) setpoint temperature, and this will indicate this condition.)

Board Temp - The temperature inside the Oxymitter electronics housing 185°F (85°C), is the max.

Board Temp Max - This is the maximum temperature that the electronics has experienced over time.

	Voltages
	The raw mV signals feeding the temperature indications listed in the
	previous paragraph.
	Output Values
	Indication of the current readings for O2 and mA.
LOI INSTALLATION	The LOI module connects to the top of the electronic assembly in the
	electronics housing. There are four matching connectors (Figure 6-5)on the
	back of the LOI module that allow the user to orient (rotate) the LOI as
	desired.
Figure 6-5. LOI Module
Connectors
		Connector
		Receptacles

LOI Module

Rear View

37260055

6-9