www.gateway.com

Installation

Installation

Rack mounting the autoloader

The autoloader can be rack mounted using the V-rail kit (included).

The following illustration shows minimum clearances for rack mount installation:

Tape magazine

Clearance to door inside a rack

Tape

2.0” (51 mm)

Front

Autoloader

Minimum side clearance (both sides)

1.0” (25 mm)

Back

27.0” (686 mm)

Minimum clearance to load or unload a magazine from the system

Minimum clearance to load a tape through the mailslot

6.0” (152 mm)

Minimum clearance between the back of the autoloader and the inside of the rack (using standard mounting brackets adjusted to their closest setting)

3.4” (86 mm)

13