
www.gateway.com | Setup |
The front panel menu has the following options:
To configure the autoloader, you must make sure that the setup includes the following:
■SCSI ID(s). For the autoloader, there is a single SCSI ID.
■Magazine(s).
■Ethernet IP address (if you are not using DHCP).
■SNMP server IP address only if SNMP is being used.
■Time server IP address (or the time zone, date, and time, if configuring
■Control mode.
■Security option.
Setting the SCSI ID
Each SCSI device attached to a server or workstation must have a unique SCSI
ID. For the autoloader, you need one SCSI ID.
To set the SCSI ID:
1If the Main menu is not already visible, press ENTER. The Main menu opens.
2Click Configuration, then press ENTER. The Configuration submenu opens.
3Scroll to SCSI ID, then press ENTER.
25