www.gateway.com

Using the Configuration page

3To change the IP address from a static address to a dynamic address, click the box next to DHCP.

To set the network configuration:

1To change the values of the subnet mask, gateway, Simple Network Management Protocol (SNMP) server, or the time server, type in the new address, using the TAB key to move from box to box.

2Click Submit.

Setting security options

When you enable the security option, users must enter a password to access the autoloader's front panel functionality (see “Default username and password” on page 55). A password allows either administrator-level access or operator-level access (see “Setting security” on page 32).

To set security:

1From any page, click Configuration. The Configuration screen opens.

2Click Security on the left side of the screen. The System Security section of the screen displays.

3To enable front panel security, click the box next to Front Panel Security Enabled.

If the box is blank, the security option for the front LCD panel is not enabled.

4Click Submit.

To reset the front panel password:

1From any page, click Configuration. The Configuration screen opens.

2Click Security on the left side of the screen. The System Security section of the screen displays.

3Click the box next to Reset Front Panel Password. A check mark appears.

4Click Submit.

To set User Administration:

1From any page, click Configuration, then press ENTER. The Configuration submenu opens.

2Click Security on the left side of the screen. The System Security section of the screen displays.

59