
CHAPTER 3: Operating your Autoloader | www.gateway.com |
Ejecting a single cartridge
When you want to remove a single cartridge from the autoloader, you can specify the cartridge you want by bar code or location, or choose the cartridge currently in the tape drive.
To eject a cartridge by bar code:
1From the Main menu, scroll to Commands, then press ENTER. The Commands submenu opens.
2Scroll to Eject, then press ENTER. The Eject submenu opens.
3Scroll to Tape, Mailslot, then press ENTER.
4Scroll to By Barcode. A bar code label appears.
5Scroll to the label that corresponds to the cartridge you want to eject, then press ENTER.
To eject a cartridge by location:
1From the Main menu, scroll to Commands, then press ENTER. The Commands submenu opens.
2Scroll to Eject, then press ENTER. The Eject submenu opens.
3Scroll to Tape, Mailslot, then press ENTER.
4Scroll to By Location.
Slots that are occupied by a data cartridge are indicated by an asterisk (*). If Auto Clean is enabled, the slot that is occupied by a cleaning tape is indicated with an “at” (@) sign. Scroll to the slot containing the cartridge you want to eject.
5Press ENTER. The cartridge you want is ejected from the mailslot.
To eject a cartridge from the tape drive:
1From the Main menu, scroll to Commands, then press ENTER. The Commands submenu opens.
2Scroll to Eject, then press ENTER. The Eject submenu opens.
3Scroll to Cartridge, then press ENTER.
4Scroll to From Drive, then press ENTER. The cartridge you want is ejected from the mailslot.
40