www.gateway.com

Important

No bar code labels can be read if there is a tape in the picker.

Data compression

To perform an inventory manually:

1From the Main menu, scroll to Commands, then press ENTER. The Commands submenu opens.

2Scroll to Inventory, then press ENTER. The autoloader scans the bar codes of all the cartridges present.

Data compression

Compressing the data means that the tape drive can write more data to the same amount of tape. Compression also increases the performance of the data transfers from or to the SCSI bus. Data compression is drive dependent and cannot be set from the front panel or On-board Remote Management. Your backup application package may also have information on compression. The front panel display indicates whether data compression is enabled or disabled.

51