www.gateway.com

Using the Configuration page

The menu headings also appear at the top of every page. To access the functionality under the menu heading, click the specific menu heading. The first time that you connect, On-board Remote Management prompts you for your username and password, then displays the opening page for that menu.

Default username and password

The default username for On-board Remote Management is guest. The default password is guest.

The username and password are case sensitive and should be entered in all lower case letters. The default username and password are valid if no usernames have been configured.

Time display

The time displayed is either regular time or power-on time. Regular time is

Month/Date/Year time, such as Nov/21/2004 19:28. Power-on time is Power On

Cycles (POC)/Power On Hours (POH), such as POC:00121, POH:00002:07:45.

■POC (5-digit number) is the number of times the system has booted since it was manufactured.

■POH is the number of hours, minutes, and seconds that the system has been on since the current boot occurred.

Feedback on pages

If there is feedback from the system when you submit a request, the feedback appears beneath the submit button. In some cases, you may have to scroll to see the feedback information.

Using the Configuration page

The Configuration page includes a submenu on the left-hand side of the page. You can set the system operations, networking, and security options from this page.

System Operations options

The options listed under System Operations include SCSI ID, Mode,

Compression, Cleaning Tape, Magazines, and System Time.

SCSI ID

You can change the drive's SCSI ID from On-board Remote Management.

To change the SCSI ID:

1From any page, click Configuration. The Configuration screen opens.

2Under System Operations, select SCSI ID.

55