www.gateway.com | Error codes | |
|
| The logs contain three main fields. |
|
|
|
| Field | Description |
|
|
|
| Time Stamp | The time the event occurred. This field helps correlate the event with a possible |
|
| application interruption. If the autoloader is unable to acquire the correct time/date |
|
| from the Simple Network Time Protocol (SNTP) server, or the front panel, the time |
|
| stamp contains values indicating the power cycle number and the time an entry |
|
| was written relative to that power cycle, listed as power on hours (POH). |
|
| The autoloader has no internal |
|
| of day from the front panel or acquire time through the network interface through |
|
| an SNTP server. |
|
|
|
| Error Code | The type of error or action to which the event is related. This field helps identify |
|
| what caused the event to occur (see “Error codes” on page 89). |
|
|
|
| Context | The event’s software register information. |
|
|
|
Error codes
Error codes appear as
Field | Description |
|
|
Recovery Action | Defines what the autoloader does, based on the event that occurred. |
| If the value is 0, the autoloader continues operations because this is typically a soft, |
| recoverable event, or an event that is just recording an action for when the development |
| team may be working on enhancements. |
| If the value is other than 0, then you must reboot the autoloader in order to recover from |
| the event. The reboot happens automatically. |
| |
Task ID: Defines what firmware task was being performed at the time of the event. | |
|
|
Task ID (in Hex) | Description |
|
|
00 | System Timer |
|
|
01 | Loader Manager |
|
|
02 | Picker |
|
|
03 | Magazine Left |
|
|
04 | Magazine Right |
|
|
07 | Drive Manager |
|
|
08 | Barcode Reader |
|
|
09 | Front Panel |
|
|
0A | IP |
|
|
0B | Diagnostic |
|
|
89