www.gateway.com

Setup

To set the number of magazines:

1From the Main menu, scroll to Configuration, then press ENTER. The Configuration submenu opens.

2Scroll to Magazines, then press ENTER. The Magazines submenu opens.

3Select either Right, Left, or Both to indicate the magazines installed in the autoloader.

Important

If you make a mistake, press ESC to backspace to the digit you want to change.

Setting passwords

Many operations on the autoloader are password-protected to make sure that data integrity is safe. You can set passwords to the Administrator level and to the Operator level. Operator-level users have access to the Commands and Status menus. Administrator-level users have access to all functionality.

To set a password:

1From the Main menu, scroll to Configuration, then press ENTER. The Configuration submenu opens.

2Scroll to Set Password, then press ENTER.

3To set a password to the operator level, scroll to Operator. To set a password to the administrator level, scroll to Administrator. Press ENTER. The Set Password screen opens.

4Press ENTER. If you are not logged in as Administrator, press ENTER again to log in. A text box appears above the first asterisk.

5The cursor automatically appears at the first character of the password.

6At each position of the password, use the up and down arrows to change the value of each character. Press ENTER to enter the character and advance the cursor to the next number. The text box above the asterisk disappears and another text box appears above the next asterisk.

7Repeat step Step 6 to enter the remaining digits of the password. When you have entered six numbers, the autoloader displays “Submit Password” below the asterisks.

8Press ENTER to submit the password. “Password Successfully changed” appears on the LCD.

9Press ENTER. The Operator and Administrator options reappear. You can either enter another password, or press ESC or ENTER, as necessary, to return to the Main menu.

33