CHAPTER 5: Troubleshooting your Autoloader

www.gateway.com

Setting the security

When you enable the security function, the diagnostic tests are password protected to ensure data integrity. To access any of the diagnostic tests, you must first enter an Administrator password. If you do not enter the password, you are prompted to enter the password when you attempt to perform a diagnostic test.

Tips & Tricks

Press ESC to backspace to a previous text box, if necessary.

To enter an Administrator Password:

1From the Main menu, scroll to Commands, then press ENTER. The Commands submenu opens.

2Scroll to Enter Password, then press ENTER. The Enter Password submenu opens.

3Scroll to Administrator, then press ENTER. The Login screen opens with a row of asterisks. A text box appears above the first asterisk.

4In the textbox, scroll to the first number of the password, then press ENTER. The text box above the asterisk disappears and another text box appears above the next asterisk.

5Repeat Step 4 to enter the remaining numbers of your password.

When you have finished entering your password, “Submit Password” appears on the LCD below the asterisks.

6Press ENTER to submit your password. The display returns to the Enter Password submenu.

Stopping a diagnostic test

At times you may need to stop a diagnostic test while it is in progress. Certain diagnostic tests even require you to stop them or they run continuously. To stop a diagnostic test while it is running, use the Halt Test function. When you select Halt Test, any picker or magazine functions complete, then the diagnostic test is stopped.

To perform a Halt Test from the front panel:

1While the diagnostic test is running, press ESC. The Diagnostics submenu opens.

2Scroll to Halt Test, then press ENTER. “User Abort” appears.

3Press ENTER to return to the Diagnostics submenu. Refer to On-board Remote Management for any test results.

To perform a Halt Test from On-board Remote Management:

1Select Halt Test from the Diagnostics submenu, then click Submit.

2Select View Status to see the results of the command. “Test Stopped” appears, along with any text results.

68