CHAPTER 3: Operating your Autoloader

www.gateway.com

To remove a magazine blank:

1Pull the magazine blank straight out.

2Replace with another magazine blank or a cartridge magazine (see “Installing a magazine” on page 42).

Changing the orientation of a magazine or magazine blank

A magazine or magazine blank can be configured to fit in the right or left magazine bay. The handle must be removed, the magazine turned, and the appropriate handle attached to match the orientation of the magazine or blank.

To remove and attach a magazine handle, you need a #1 PHILLIPS® screwdriver.

Right side of magazine

Left side of magazine

Magazine blank (left side handle shown)

44