
CHAPTER 3: Operating your Autoloader | www.gateway.com |
Viewing the tape drive version
To view the tape drive version:
1From the Main menu, scroll to Status, then press ENTER. The Status submenu opens.
2Scroll to Drive, then press ENTER. The Drive submenu opens.
3Scroll to Version, then press ENTER. A list of messages appears. These messages may include:
Field | Description |
|
|
Product Type | Indicates the type of drive installed. |
|
|
Version | Indicates the firmware version of the drive. |
|
|
Viewing Ethernet information
To view the Ethernet information:
1From the Main menu, scroll to Status, then press ENTER. The Status submenu opens.
2Scroll to Ethernet, then press ENTER. A list of messages appears. These messages may include:
Field | Description |
|
|
MAC Address | Indicates the unique network identifier associated with the |
| autoloader. |
|
|
IP Address | Indicates the static IP address or currently assigned dynamic IP |
| address. The text "DHCP" appears for a dynamic ID address. |
|
|
Network | Indicates whether the autoloader is connected to the network and at |
| what speed. |
|
|
Running an inventory
The autoloader automatically runs an inventory whenever you turn it on or insert a magazine. An inventory checks each magazine slot, the drive, the picker (the mechanism that grabs the tape from the library and moves it to the drive), and the mailslot to determine if a cartridge is present. If a cartridge is present, the autoloader also reads the bar code label, if available. If you need to run an additional inventory, you can do it manually.
50