www.gateway.com

Important

If you make a mistake, press ESC to backspace to the digit you want to change.

Setup

To set a static IP address:

1From the Main menu, click Configuration, then press ENTER. The Configuration submenu opens.

2Scroll to Ethernet, then press ENTER. The Ethernet submenu opens.

3Scroll to Set IP, then press ENTER. The Set IP screen opens.

4Scroll to Static IP, then press ENTER. The cursor automatically appears at the first digit.

5At each position of the IP address, use the up and down arrows to change the value of each digit. Press ENTER to advance the cursor to the next digit.

When you have advanced through all of the digits of the IP address, the autoloader displays “Enter to save.”

6Press ENTER. The Configuration submenu appears and the static IP is now in effect. You do not need to reboot the autoloader.

7Press ESC or Enter to return to the Ethernet submenu.

Important

If you make a mistake, press ESC to backspace to the digit you want to change.

Setting the subnet mask

Creating a subnet mask is a method of splitting IP networks into a series of subgroups, or subnets, to improve performance or security.

To set a subnet mask:

1From the Main menu, click Configuration, then press ENTER. The Configuration submenu opens.

2Scroll to Ethernet, then press ENTER. The Ethernet submenu opens.

3Scroll to Set Subnet Mask, then press ENTER. The cursor automatically appears at the first digit.

4At each position of the Subnet Mask address use the up and down arrows to change the value of each digit. Press ENTER to advance the cursor to the next digit.

When you have advanced through all of the digits of the subnet mask address, the autoloader displays “Enter to save.”

5Press ENTER. “New Subnet Mask xxx.xxx.xxx” appears on the LCD. You do not need to reboot the autoloader.

6Press ESC or ENTER to return to the Ethernet submenu.

27