
CHAPTER 4: Managing and Monitoring your Autoloader | www.gateway.com |
Using the Diagnostics page
From the Diagnostics page, you can run various tests on the autoloader. You can also view error and history logs, test progress, identify the autoloader in a rack, or reset the system.
Running diagnostic tests
The diagnostic tests available on the autoloader include:
■
■
■
■
■
Viewing Error or History logs
To view error or history logs:
1From any page, click Diagnostics. The Diagnostics screen opens.
2Under View Error and History Logs, click View Logs.
You can also save the logs to a file by clicking Save Logs. If you save the logs to a file, you must select a destination folder within 60 seconds.
■View Logs lets you view a summary of the hardware, software, and update logs for the autoloader.
■Save Logs saves detailed log information to a file for the autoloader. On some browsers, after saving logs, it may be necessary to click Home to continue using the
Diagnostics
To view the various diagnostic options:
1From any page, click Diagnostics. The Diagnostics screen opens.
2Select the diagnostic test that you want to run from the Test menu.
3Specify a loop count, if desired.
4Click Start Test. To halt a test in progress, click Stop Test.
5To view the status of the test while the test is running, click View Diagnostic Test Progress, then click View Status. A separate screen indicates which test is running and the current status of the diagnostic test.
6To refresh the status information, click View Diagnostic Test Progress, then click View Status again.
62