Chapter 2: Installing and Setting Up your Autoloader

www.gateway.com

Installation in a 10-32 threaded-hole rack

To install the rail in a 10-32 threaded-hole rack:

1Identify the correct mounting holes on the vertical rail, making sure that the selected holes are on the same level.

Vertical rail

 

Front cover

Autoloader tab

plate

Rail

(autoloader not

assembly

shown)

 

2Mount the front cover plate to the vertical rail in the identified holes by using 10-32 x .625 bolts in the center two holes of the plate.

3Install the chassis into the rack by aligning the chassis-mounted rails with the mounted rail assemblies, then pushing the chassis into the rack.

4Secure the chassis into the rack by bolting the autoloader tabs to the upper and lower holes in the front cover plate using 10-32 x .625 bolts.

18