www.gateway.com

Important

If the supplied SCSI cable does not fit the connector on your SCSI host adapter, you have an incompatible SCSI host adapter. Contact your Gateway representative or your SCSI host adapter manufacturer for

information.

Installation

3Attach the other end of the SCSI cable to the connector on the SCSI host adapter or to the connector on the previous device on the SCSI bus.

1

2

3

1Ethernet cable

2SCSI cable

3SCSI terminator

4Attach the terminator to the remaining SCSI connector on the back panel of the autoloader (if the autoloader is the last or only device on the SCSI bus). Otherwise, attach the cable to the next device on the SCSI bus. Make sure that the last device on the SCSI bus is correctly terminated.

5Plug the power cable into the power connector on the back panel of the autoloader.

6Plug in the power cable to the nearest correctly grounded power outlet.

7Turn on the autoloader by setting the power switch on the front panel to the ON position. Check the LCD screen to make sure the autoloader is receiving power. If it is not, check the power connections and your power source.

8Turn on any other devices you turned off earlier.

9During the Power-on Self Test (POST), both LEDs are illuminated briefly, followed by only the Ready/Activity LED flashing. When the initialization sequence is complete, the LCD screen displays the Home screen.

10Turn on the server.

21