
CHAPTER 4: Managing and Monitoring your Autoloader | www.gateway.com |
Important
To view the list of currently defined users, click Submit with Select User Type.
3From the list next to Select User Type, select Operator 1, Operator 2, Administrator 1, or Administrator 2.
4In the Username field, type a user name.
5In the Password field, enter the new password.
6In the Verify Password field,
7Click Submit.
Client Authorization Control
Client Authorization Control lets list IP addresses that are authorized to perform functions on the autoloader using
To set the Client Authorization Control:
1From any page, click Configuration. The Configuration screen opens.
2Click Security on the left side of the screen.
3Scroll to Client Authorization Control. In this section is a list of the IP addresses that are authorized to perform functions using
■If enabled, each set can be used to specify either a range of IP addresses or a pair of specific IP addresses that are allowed to administer this autoloader. A set can also be used to specify a single IP address if the desired IP address is entered into both the “a” and “b” portions of the set. When a set is used to specify a range of IP addresses, the “b” portion of each address set must be greater than or equal to the “a” portion of that address set.
■If neither set is enabled, any IP client can administer the autoloader. If a single set is enabled, only clients that pass the test specified by that set are allowed administrator access. If both sets are enabled, any client that passes either of the two filter tests can administer the autoloader.
The Web server always allows any client to view the status information of the autoloader, regardless of the authorized client list or the overlap control policy.
4Click the box to select Enable or Disabled.
5Type the IP addresses in the appropriate boxes.
6Click Submit to save.
60