Graco 332564B Network Communication I/O Data Map, ProMix PD2K Network Outputs

Operation Using a Programmable Logic Controller (PLC)

Network Communication I/O Data Map

ProMix PD2K Network Outputs

The ProMix PD2K Network Outputs are Read-Only and should be treated as inputs to a PLC

or other networking device. These registers

OUTPUT REGISTER 00: Current System Mode

provide various system and component status, measurement, and set point values. See Network Output Data Map (Read Only), page 33.

The Current System Mode register contains a number that indicates the current operation mode of the PD2K system.

Number	Operation Mode	Description
1	Pump Off	The pumps are currently powered down and the system is not in
		operation.
2	Recipe Change	The system is in the process of a color change sequence.
3	Recipe Change: Purge	The system is purging material A as part of a recipe change.
	A
4	Recipe Change: Purge	The system is purging material B as part of a recipe change.
	B
5	Recipe Change: Fill	The system is filling the hose from the remote valves to the mix
		manifold with material as part of a recipe change.
6	Mix Fill	The system is mixing material at ratio through the mix manifold
		and out the gun.
7	Mix	The system is currently mixing/spraying material.
8	Mix Idle	The system has paused mix operation due to the absence of a gun
		trigger signal.
9	Purge A	The system is purging material A while in Standby.
10	Purge B	The system is purging material B while in Standby.
11	Standby: Mix Ready	The system has a valid recipe loaded out to the gun.
12	Standby: Fill Ready	The system has a valid recipe loaded in the pumps, but not in the
		gun.
13	Standby: Mix Not Ready	The system requires that a recipe change operation be completed.
14	Standby: Alarm	The system has an active alarm.

28 332564B