Graco 332564B important safety instructions Write Recipe

Operation Using a Programmable Logic Controller (PLC)

Write Recipe

The Write Recipe command allows users to configure an entire recipe remotely. See Recipe Screen, page 72, for more details on recipes and recipe parameters. The return registers will echo the arguments received.

NOTE: The recipe must be enabled via the ADM before it can be loaded for mixing.

Example: Configure Recipe 6 for Color = 2, Catalyst = 1, Color Flush Sequence = 2, Catalyst Flush Sequence = 3, Mix Ratio Set Point = 1.50:1, and Potlife = 10 minutes.

DCS Register	Parameter Description	Data	Units	Value	Range
		Type
DCS	Write Recipe	uint32	NONE	2	0	- 16
Command
Argument 0	Recipe Number	uint32	NONE	6	0	- 60
Argument 1	Material A	uint32	NONE	2	0	– 30
Argument 2	Material B	uint32	NONE	31	0, 31 – 34
Argument 3	Material A Flush Sequence	uint32	NONE	2	1	- 5
Argument 4	Material B Flush Sequence	uint32	NONE	3	1	- 5
Argument 5	Mix Ratio Set Point	uint32	NONE	150 = 1.50:1	0 - 5000
Argument 6	Potlife Time Set Point	uint32	min	10	0	- 999
Acknowledge	Command Acknowledged	uint32	NONE	2 = ACK	0	- 4
Return 0	Recipe Number	uint32	NONE	6	0	- 60
Return 1	Material A	uint32	NONE	2	0	– 30
Return 2	Material B	uint32	NONE	31	0, 31 – 34
Return 3	Material A Flush Sequence	uint32	NONE	2	1	– 5
Return 4	Material B Flush Sequence	uint32	NONE	3	1	– 5
Return 5	Mix Ratio Set Point	uint32	NONE	150	0	- 5000
Return 6	Potlife Time Set Point	uint32	min	10	0	- 999

332564B 49