Graco 332564B important safety instructions System Screen

System Screen 1

System screen 1 includes the following fields which define your system.

Figure 28 System Screen 1, During Standby

Setup Mode Screens

Diagnostic Mode

Select this box to display flow rate and pressure for each pump on the Home Screen, page 58.

Color Pumps

Enter the number of color pumps in your system.

Catalyst Pumps

Enter the number of catalyst pumps in your system.

Non-Mix Pressure

Enter a lower pressure for use when not mixing and spraying (for example during fill or flushing).

NOTE: Low pressure systems may be set 100 psi (0.7 MPa, 7 bar) lower than target pressure; high pressure systems may be set 300 psi (2.1 MPa, 21 bar) lower than target pressure.

Solvent Meter

Select this box if your system uses a solvent meter. The Solvent K-Factor field will then become active.

Solvent K-Factor

Enter the solvent meter K-Factor.

332564B 67