Graco 332564B important safety instructions Write Flush Sequence

Operation Using a Programmable Logic Controller (PLC)

Write Flush Sequence

The Write Flush Sequence command allows users to configure an entire flush sequence remotely. See Flush Screen, page 73, for more details of flush sequence parameters. The return registers will echo the arguments received.

Example: Configuring Flush Sequence 4 for Gun Purge Time = 10 sec, Initial Flush Volume = 125 cc, Final Flush Volume = 250 cc, Wash Cycles = 1, Strokes per Cycle = 2.

DCS Register	Parameter Description	Data	Units	Value	Range
		Type
DCS	Write Flush Sequence	uint32	NONE	3	0	- 16
Command
Argument 0	Flush Sequence #	uint32	NONE	4	1	- 5
Argument 1	Gun Purge Time	uint32	sec	10	0	- 999
Argument 2	Initial Flush Volume	uint32	cc	125	0	- 9999
Argument 3	Final Flush Volume	uint32	cc	250	0	- 9999
Argument 4	# Wash Cycles	uint32	NONE	1	0	- 99
Argument 5	Strokes per Wash Cycle	uint32	NONE	2	0	- 99
Acknowledge	Command Acknowledged	uint32	NONE	2 = ACK	0	- 4
Return 0	Flush Sequence #	uint32	NONE	4	1	- 5
Return 1	Gun Purge Time	uint32	sec	10	0	- 999
Return 2	Initial Flush Volume	uint32	cc	125	0	- 9999
Return 3	Final Flush Volume	uint32	cc	250	0	- 9999
Return 4	# Wash Cycles	uint32	NONE	1	0	- 99
Return 5	Strokes per Wash Cycle	uint32	NONE	2	0	- 99

50 332564B