Graco 332564B important safety instructions Recipe Screen

Setup Mode Screens

Recipe Screen

Figure 33 Valid Recipe Screen

Recipe

Enter the desired recipe number (1-60).

Recipe 0

Use Recipe 0 to flush the system.

•If a recipe (1–60) is loaded: Select Recipe 0 to flush the previously active pumps and purge the gun.

•If Recipe 0 or 61 is loaded: Select Recipe 0 to flush all pumps and purge the gun.

Enabled

Selecting “Enabled” makes the selected recipe accessible from the Spray screen on the ADM or to the PLC.

Note: Recipe 0 is always enabled.

Color (A) Valve

Enter the desired color valve number (1-30).

NOTE: If you enter a number which is not valid in your system configuration, the field will be highlighted and the recipe becomes invalid. For example, if your configuration has 8 color valves and you enter 30, the field will appear as shown below.

Figure 34 Invalid Recipe Screen

Catalyst (B) Valve

Enter the desired catalyst valve number (1-4).

NOTE: If you enter a number which is not valid in your system configuration, the field will be highlighted and the recipe is invalid. For example, if your configuration has 1 catalyst valve and you enter 4, the field will be highlighted and the recipe is invalid.

Flush Sequence

Enter the desired flush sequence (1-5) for the color

(A)valve and the catalyst (B) valve. The gun purge time for each material depends on the flush sequence assigned to each. See Flush Screen, page 73. If materials A and B require different purge times, assign separate flush sequences. Set the necessary gun purge time for each. For hard to flush colors, select a longer sequence. 1 is the default, and should be designated for the longest, most thorough flush duration.

Mix Ratio

Enter the desired mix ratio (0 to 50.0):1.

Potlife Time

Enter the potlife time (0 to 999 minutes). Entering 0 disables this function.

72 332564B