Hitachi HCX5000I manual Blocking and Sending Caller ID

BLOCKING AND SENDING CALLER ID SELECSET 500A USER GUIDE

Blocking and Sending Caller ID

About ANI block

ANI publicity and privacy when you’re making a call

Activating ANI privacy (block) on a per-call basis

Procedure

Like other internal users, you can use the ANI block feature to allow your caller ID to be sent and displayed or prevent your caller ID from being sent and displayed on a per-call basis. Allowing the caller ID to be sent is referred to as ANI publicity. Preventing, or blocking your caller ID from being sent is known as ANI block (privacy).

Similarly, when users who call you either send or block caller ID, your SelecSet display reflects the user’s specification for this feature.

Depending on how your system administrator has set up your system, either ANI publicity or privacy is set for all calls that you make. Consult your system administrator for more information on how your system is set up.

If your system is set up for ANI publicity, you can override this setting and block your caller ID from being sent and displayed.

To activate ANI block on a per-call basis:

1Dial the ANI privacy (block) feature access code (usually *67).

2Dial your desired number. Your caller ID is not sent for this call only. For all subsequent calls, your caller ID is sent.

2-62 HCXTD840, Issue 1, July 2001