Hitachi HCX5000I manual About Your Selecset 500A

CHAPTER 1: ABOUT YOUR SELECSET 500A CONFERENCING

6To exit the conference without disconnecting the other two parties, press <JOIN>. The conference is still connected but out of your control. Press <START> to hang up.

7To place the conference on hold, press <HOLD>.

You can only hold a conference by pressing the <HOLD> key. You cannot use soft park or hold loop keys to hold a conference. You can only place a conference on hold if your system is set up for multiparty conferences.

8To retrieve the held conference, press <START>, then press the winking CAP representing the held conference.

HCXTD840, Issue 1, July 2001 1-47