Hitachi HCX5000I manual Determining if a Data Adapter is Assigned

DETERMINING IF A DATA ADAPTER IS ASSIGNED

Determining if a Data Adapter is Assigned

Procedure	To determine if a data adapter is assigned:
	1 Press and hold the <DA> key to display a new line
	above the key labels. This display tells you if a data
	adapter is assigned to the console.
	2 Lift your console to see if a wedge-shaped device
	(data adapter) is attached underneath and the console
	has short legs attached to it. When you first assign a
	data adapter, use this test procedure to confirm that
	your data adapter is assigned properly. See Figure A-8
	for an example of a display showing data adapter
	assignment.
					*** DATT TEST ***
					KEY NO. =
			RINGING FREQUENCY = OFF
				RINGING LEVEL = NORMAL
			RINGING PATTERN = LINE-LINE (USA)
				DATA ADAPTER = NO
		R-FRQ R-LEV R-PTN DA				ROM LCD

Figure A-8: Displaying data adapter assignment

If a data adapter is assigned to your console, the display reads DATA ADAPTER = YES.

HCXTD840, Issue 1, July 2001 A-11