CHAPTER 2: ADDITIONAL OPERATIONS LABELING INSTRUCTIONS
HCXTD840, Issue 1, July 2001 2-97
Labeling InstructionsKey labeling After you program your SelecSet, you should label your
keys. The fixed keys, hold loops and <INC>, <RCL> and
<INF> keys are pre-labeled. Your SelecSet 500A also
comes with sheets of pre-printed and blank labels for use
on suggested and optional programmable keys such as
specific autodial numbers or trunk group answer keys.
Procedure To label your keys:
1Insert the entire label sheet in a typewriter.
2Type on the desired label.
3When you finish labeling your SelecSet, keep the
sheet in case you reprogram your keys.
4To verify that you have the proper key for the label,
press <DSPL> plus any progr ammable key. If the key
is programmed, the bottom line of the display shows
the key number plus the feature or autodial number
assigned to the key; if not, th e key number plus
Autodial displays.
5Press <DSPL> plus any soft key to return to the
normal display.
6Remove the label and place it carefully on the key.