Hitachi HCX5000I manual Holding a Single Call, Using a hold, Loop, Fixed and additional hold loops

CHAPTER 1: ABOUT YOUR SELECSET 500A HOLDING A SINGLE CALL

Holding a Single Call

Using a hold		To hold a single call using a hold loop:
loop...		1 Press a hold loop (HLD1-HLD4) to place an active
			call on hold.
			The hold loop winks, and the associated hold loop
			displays the held call.
	1 1 : 0 0 a m We d Ma r 1 0			6 8 6	C a l l s Wa i t : 1
	1
	2
	3
	4
	L 1 2 0 1 S t a t i o n		L 2
	L 3		L 4
	MS G		C H A R GE		F E A T U R

Fixed and additional hold loops

2Press the winking hold loop to retrieve the call.

Each SelecSet 500A terminal is equipped with four fixed hold loops (HLD1-HLD4). However, you can assign up to four additional hold loops (HLD5-HLD8) to your programmable keys. The first four hold loops are used in the examples in this guide because they have corresponding displays. Additional hold loops function in the same way, but do not have displays.

HCXTD840, Issue 1, July 2001 1-39