Hitachi HCX5000I manual Demonstrating Default Ringing Patterns

DEMONSTRATING DEFAULT RINGING PATTERNS

Demonstrating Default Ringing Patterns

Procedure	To demonstrate default ringing patterns:
	1 While displaying any ringing frequency (500,
	400/500, 400/600, 500/600), the default pattern for
	station-to-station calls is displayed and demonstrated.
	The default pattern is simply the pattern normally
	used. Figure A-6provides an example of the default
	ringing pattern.
					*** DATT TEST ***
					KEY NO. =
			RINGING FREQUENCY = 500Hz
				RINGING LEVEL = NORMAL
			RINGING PATTERN = LINE-LINE (USA)
		R-FRQ R-LEV R-PTN DA				ROM LCD

Figure A-6: Default for station-to-station calls

2To display/demonstrate another ringing pattern, press <R-PTN> again. See Figure A-7

*** DATT TEST ***

KEY NO. =

RINGING FREQUENCY = 500Hz

RINGING LEVEL = NORMAL

RINGING PATTERN = TRUNK-LINE (USA)

R-FRQ R-LEV R-PTN DA ROM LCD

Figure A-7: Displaying another ringing pattern

HCXTD840, Issue 1, July 2001 A-9