Hitachi HCX5000I manual Answering a zone

PAGING SELECSET 500A USER GUIDE

Using zone paging with auto meet-me, continued

Using zone paging with park

5To answer a zone page with auto meet-me, the user dials the zone paging answer code.

6The user is connected to the paging party immediately.

To use zone paging with park:

1Press the <ZPG/P> (zone paging with park) key or dial the zone paging with park access code while connected to the caller.

2Dial the proper zone number.

3Dial a parked call identifier (PCI). When the PCI is dialed, you can do one of two things:

-Press <START> to complete the park, OR

-Press <CONF> to create a three-way conference when the paged party responds.

Note: A PCI is a number used to identify the parked call. Contact your system administrator for a list of the PCIs available in your system, or, use your own station number or the station number of the paged party as a PCI. Parked call identifiers (PCIs) are sometimes referred to as beeper identification numbers (BIDs).

Answering a zone page

To answer a zone page with park, the user dials the call park retrieve access code, plus the parked call identifier (PCI) used to park the call and is instantly connected to the parked call.

2-80 HCXTD840, Issue 1, July 2001