Hitachi HCX5000I manual Display, Line-by-line explanation of the display follows, Components

THE DISPLAY SELECSET 500A USER GUIDE

Display	A line-by-line explanation of the display follows.
components
	Line	Function
	1	Provides the time and date, your station
		number, and the number of calls waiting.
		The calls waiting display registers incoming
		3- or 4-digit trunk calls, internal calls,
		information (dial 0) calls and recalls
		(outside calls that are transferred to a station
		that does not answer and automatically
		return to your console). While users in your
		facility call you by dialing 0, you also have
		your own 3- or 4-digit station number.
	2 through 5	Represent call appearances. Four call
		appearances keys, or CAPs, labeled CAP,
		CAP2, CAP3 and CAP4 are provided. Each
		CAP can be used to represent a single call.
		CAPs are located above and to the left of the
		keypad. They are discussed in more detail
		under “Displaying Caller ID Information”
		on page 1-7.
	6 and 7	Display information about hold loops. Four
		hold loops (HLD1-HLD4) are usually
		provided on your SelecSet. These hold
		loops are located above and to the right of
		the keypad. Hold loops are discussed in
		greater detail under “Displaying Caller ID
		Information” on page 1-7.
	8	The soft key menu lets you retrieve
		messages, view the charge for the last
		outgoing call made from the console, and
		control certain station features. See “Soft
		Keys” on page 1-18 for more information.

1-4 HCXTD840, Issue 1, July 2001