Hitachi HCX5000I manual Key Name Function/operation

FIXED KEYS SELECSET 500A USER GUIDE

Table 1-1 SelecSet 500A Fixed Keys
Key Name	Function/operation
<ALARM>	The major/minor alarm lights steadily when a system
	malfunction is detected. The alarm remains lit until the
	problem is corrected.
<NIGHT>	Press <NIGHT> to place the system in night mode
(CAP1-CAP4)	Call appearances are virtual lines that are used to receive/
	place/hold calls while call control operations are performed.
	CAPs can represent up to four calls, with each CAP
	representing one call.
<HLD1>-<HLD4>	Hold loops are used to place up to four calls on hold, with
	each held call represented by a display. (Each hold loop can
	be used to place a single call on hold).
<DSPL>	Press <DSPL> to display functions of programmed keys
<CONF>	Press <CONF> to establish a conference call. Press
	<JOIN>, dial a station number or outside number and press
	<CONF> to establish a three-party conference. Press
	<CONF>, dial a number and press <CONF> again to
	establish a multiparty conference of up to six parties.
<SWAP>	Press <SWAP> to alternate between two sides of a split call.
<START>	Press <START> to originate calls or perform other call
	processing functions (like picking up the receiver on other
	phones). Gives or cancels dial tone.
<CNCL>	Press <CNCL> during call transfer if you misdial a number.
	Pressing this key disconnects the last party added to a
	conference.
<HOLD>	Press <HOLD> to place an active call on hold.
<JOIN>	Press <JOIN> to transfer a call and return to the idle state.
<ANS>	Press <ANS> to answer all calls that ring at the attendant
	position.

1-14 HCXTD840, Issue 1, July 2001