Hitachi HCX5000I manual Dropping out of a multiparty conference

CHAPTER 1: ABOUT YOUR SELECSET 500A CREATING A MULTI-PARTY CONFERENCE

Dropping out of a multiparty conference

8To disconnect the last person added to the conference, press <CNCL>.

Only the final person added to the conference can be dropped by pressing <CNCL>. Afterwards, other parties must disconnect by hanging up.

9To exit without disconnecting the other parties, press <JOIN>. The conference is still active, but is now controlled by the remaining parties.

If you drop out of a multiparty conference, the remaining parties located at your facility cannot transfer or add other members to the conference. (Dropping out of a three-party conference does not affect the remaining parties this way.)

HCXTD840, Issue 1, July 2001 1-51