Hitachi L2002 4–9, Option, Description, Function Name, Input Function Summary Table, Input Function Summary Table –, “Using Intelligent Input Terminals” on page

3–50

“C” Group: Intelligent Terminal Functions

Input Function Summary Table – This table shows all twenty-four intelligent input functions at a glance. Detailed descriptions of these functions, related parameters and settings, and example wiring diagrams are in “Using Intelligent Input Terminals” on page 4–9.

			Input Function Summary Table
	Option	Terminal	Function Name		Description
	Code	Symbol
	00	FW	Forward Run/Stop	ON	Inverter is in Run Mode, motor runs forward
				OFF	Inverter is in Stop Mode, motor stops
	01	RV	Reverse Run/Stop	ON	Inverter is in Run Mode, motor runs reverse
				OFF	Inverter is in Stop Mode, motor stops
	02	CF1 *1	Multi-speed Select,	ON	Binary encoded speed select, Bit 0, logical 1
			Bit 0 (LSB)
				OFF	Binary encoded speed select, Bit 0, logical 0
	03	CF2	Multi-speed Select,	ON	Binary encoded speed select, Bit 1, logical 1
			Bit 1
				OFF	Binary encoded speed select, Bit 1, logical 0
	04	CF3	Multi-speed Select,	ON	Binary encoded speed select, Bit 2, logical 1
Configuring ParametersDrive			Bit 2
				OFF	Binary encoded speed select, Bit 2, logical 0
	05	CF4	Multi-speed Select,	ON	Binary encoded speed select, Bit 3, logical 1
			Bit 3 (MSB)
				OFF	Binary encoded speed select, Bit 3, logical 0
	06	JG	Jogging	ON	Inverter is in Run Mode, output to motor runs at
					jog parameter frequency
				OFF	Inverter is in Stop Mode
	07	DB	External DC Braking	ON	DC braking will be applied during deceleration
				OFF	DC braking will not be applied
	08	SET	Set (select) 2nd	ON	The inverter uses 2nd motor parameters for
			Motor Data		generating frequency output to motor. The selec-
					tion of 1st or 2nd motor is available only during
					Stop Mode.
				OFF	The inverter uses 1st (main) motor parameters
					for generating frequency output to motor
	09	2CH	2-stage Acceleration	ON	Frequency output uses 2nd-stage acceleration
			and Deceleration		and deceleration values
				OFF	Frequency output uses standard acceleration and
					deceleration values
	11	FRS	Free-run Stop	ON	Causes output to turn OFF, allowing motor to
					free run (coast) to stop
				OFF	Output operates normally, so controlled deceler-
					ation stops motor