Hitachi L2002 R/W, Name, Register, Description, Network Data, Holding Registers, “F” Group Main Profile Parameters

B–25

L2002 Inverter

The table below lists the holding registers for the “F” Group Main Profile Parameters.

	Holding Registers, “F” Group Main Profile Parameters
					Network Data
Func.
	Name	R/W	Description	Register
Code						Range	Res.
				hex	dec.
F002	Acceleration (1) time	R/W	Standard default acceleration,	1014h	04116	1 to	0.01
(high)	setting *1		range is 0.01 to 3000 sec.			300000	sec
F002		R/W		1015h	04117
(low)
								Appendix
(low)	Acceleration (1) time	R/W	Standard default acceleration,	1501h	05377	1 to	0.01
F202
(high)	setting, 2nd motor *1		2nd motor,			300000	sec
F202		R/W	range is 0.01 to 3000 sec.	1502h	05378
								B
F003	Deceleration (1) time	R/W	Standard default deceleration,	1016h	04118	1 to	0.01
(high)	setting *1		range is			300000	sec
			0.01 to 3000 sec.
F003		R/W		1017h	04119
(low)
F203	Deceleration (1) time	R/W	Standard default deceleration,	1503h	05379	1 to	0.01
(high)	setting, 2nd motor *1		2nd motor,			300000	sec
			range is 0.01 to 3000 sec.
F203		R/W		1504h	05380
(low)
F004	Keypad Run key routing	R/W	Two options; select codes:	1018h	04120	0, 1	—
			00 ...Forward
			01 ...Reverse

Note 1: When the value is 10000 (100.0 seconds), a value in the second decimal place is ignored.