Hitachi L2002 Timing” on page 3–61, See “Output Logic and

					L2002 Inverter		B–41
		“C” Group Intelligent Terminal Functions
					Network Data
Func.
	Name	R/W	Description	Register
Code						Range	Res.
				hex	dec.
C081	O input span calibration	R/W	Scale factor between the	1141h	04417	0 to 2000	0.1 %
			external frequency command
			on terminals L – O (voltage
			input) and the frequency
			output, range is 0.0 to 200.0%
C082	OI input span calibra-	R/W	Scale factor between the	1142h	04418	0 to 2000	0.1 %
	tion		external frequency command					Appendix
			on terminals L – OI (current
			input) and the frequency
			output, range is 0.0 to 200.0%
C085	Thermistor input tuning	R/W	Range is 0.0 to 200.0%	1144h	04420	0 to 2000	0.1 %	B
C086	[AM] terminal offset	R/W	Range is 0.0 to 10.0V	1145h	04421	0 to 100	0.1 V
	tuning
C091	Debug mode enable	R	Displays debug parameters.	1148h	04424	0, 1	—
			Two option codes:
			00...Disable
			01...Enable
C101	Up/Down memory	R/W	Controls speed setpoint for	1149h	04425	0, 1	—
	mode		the inverter after power cycle.
	selection		Two option codes:
			00...Clear last frequency
			(return to default frequency
			F001)
			01...Keep last frequency
			adjusted by UP/DWN
C102	Reset selection	R/W	Determines response to Reset	114Ah	04426	0, 1, 2	—
			input [RST].
			Three option codes:
			00...Cancel trip state at input
			signal ON transition, stops
			inverter if in Run Mode
			01...Cancel trip state at signal
			OFF transition, stops inverter
			if in Run Mode
			02...Cancel trip state at input
			signal ON transition, no effect
			if in Run Mode
C141	Input A select for logic	R/W		1150h	04432	0, 1, 2, 3,	—
	output		See “Output Logic and			4, 5, 6, 7,
			Timing” on page 3–61			8, 9
C142	Input B select for logic	R/W		1151h	04433
	output