Hitachi L2002 manual 267

					L2002 Inverter		B–31
	Holding Registers for “A” Group Standard Functions
					Network Data
Func.
	Name	R/W	Description	Register
Code						Range	Res.
				hex	dec.
A093	Deceleration (2) time	R/W	Duration of 2nd segment of	1076h	04214	1 to	0.1 sec
(high)	setting		deceleration, range is:			300000
			0.01 to 3000 sec.			*1
A093		R/W		1077h	04215
(low)
A293	Deceleration (2) time	R/W	Duration of 2nd segment of	151Ah	00122	1 to	0.1 sec
(high)	setting, (2nd motor)		deceleration, range is:			300000		Appendix
			0.01 to 3000 sec.			*1
A293		R/W		151Bh	00123
(low)
A094	Select method to switch	R/W	Two options for switching	1078h	04216	0, 1	—
	to Acc2/Dec2 profile		from 1st to 2nd accel/decel:					B
			00... 2CH input from terminal
A294	Select method to switch	R/W		151Ch	05404
			01... transition frequency
	to Acc2/Dec2 profile,
	2nd motor
A095	Acc1 to Acc2 frequency	R/W	Output frequency at which	107Ah	04218	0 to 4000	0.1 Hz
	transition point		Accel1 switches to Accel2,
			range is 0.0 to 400.0 Hz
A295	Acc1 to Acc2 frequency	R/W		151Eh	05406
	transition point, 2nd
	motor
A096	Dec1 to Dec2 frequency	R/W	Output frequency at which	107Ch	04220	0 to 4000	0.1 Hz
	transition point		Decel1 switches to Decel2,
			range is 0.0 to 400.0 Hz
A296	Dec1 to Dec2 frequency	R/W		1520h	05408
	transition point, 2nd
	motor
A097	Acceleration curve	R/W	Set the characteristic curve of	107Dh	04221	0, 1	—
	selection		Acc1 and Acc2, two options:
			00... linear
			01... S-curve
A098	Deceleration curve	R/W	Set the characteristic curve of	107Eh	04222	0, 1	—
	selection		Acc1 and Acc2, two options:
			00... linear
			01... S-curve
A101	[OI]–[L] input active	R/W	The output frequency corre-	1080h	04224	0 to 4000	0.1 Hz
	range start frequency		sponding to the current input
			range starting point.
			Range is 0.00 to 400.0 Hz
A102	[OI]–[L] input active	R/W	The output frequency corre-	1082h	04226	0 to 4000	0.1 Hz
	range end frequency		sponding to the current input
			range ending point.
			Range is 0.00 to 400.0 Hz