8.Power Cords
Operator or installer must remove power, BNC, alarm, and other connections before moving the equipment.
9.Lightning
For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the equipment due to lightning and
10.Overloading
Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.
11.Objects and Liquids
Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the equipment.
12.Servicing
Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel.
13.Damage Requiring Service
Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
•When the
•If liquid is spilled or objects have fallen into the equipment
•If the equipment has been exposed to rain or water
•If the equipment does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the equipment to its normal operation.
•If the equipment has been dropped or the cabinet damaged
•When the equipment exhibits a distinct change in
14.Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
15.Safety Check
Upon completion of any service or repairs to this equipment, ask the service technician to perform safety checks to determine that the equipment is in proper operating condition.
16.Field Installation
This installation should be made by a qualified service person and should conform to all local codes.
Document 900.0856 Rev B | 15 |
02/08 |
|
